Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Murphy
Gate repair in Murphy, TX usually costs between $185 and $1,400 depending on what failed. A hinge replacement on a cedar privacy gate runs $185-$320. A full ornamental iron gate reset with new post footings in that Blackland Prairie clay runs $900-$1,400. Most Murphy repairs are scheduled and completed within two to three business days, and we quote every job in writing before any work starts. If your gate is sagging, dragging, or dead at the motor, call (469) 299-5902 and a live person answers, not a voicemail loop.
We know Murphy’s subdivisions, from Maxwell Creek to Rolling Ridge to Timbers at Maxwell Creek. We know which HOAs require satin black powder coat, which ones allow oil-rubbed bronze, and which ones will reject a repair done with the wrong hinge profile. That local knowledge matters when a compliance officer is reviewing your gate.
Why Vance Gate Repair Dallas Is Murphy’s Preferred Gate Repair Company
Homeowners in Murphy call us because we hand them a written price before anyone picks up a tool. That’s Clause 1 of our Haven Standard: the quote is on paper, the scope is on paper, and the final invoice matches the quote. No surprise line items.
Adrian Vance started this company in 2014 doing commercial access-control work: parking gates, card readers, photo-eyes, and limit switches that had to be documented. That documentation habit carried over to residential gates. When we leave a Murphy job, you get a photo log of what we found, what we adjusted, and what we installed. The next technician who touches your gate won’t guess. They’ll see the record.
Murphy customers also value that we service nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t steer you toward replacing a motor when the one on your post can be repaired.
Technicians dispatched to Murphy are background-checked and uniformed. You get the name and photo of who’s coming before they arrive. And your work is covered by the 365-Day Done Right Promise: if the repair isn’t right, we make it right within one year, no argument, no fee.
Our Gate Repair Services in Murphy
Hinge & Post Repair
Murphy sits on Blackland Prairie expansive clay. It swells in spring rains and shrinks in August heat. Gate posts set in that soil heave, tilt, and twist on a seasonal cycle. We don’t just swap a hinge and hope. We check the post footing, reset the post in a deeper concrete pier when it has shifted, and photograph the new position before we leave. In Maxwell Creek’s older sections, original cedar gates hung on standard galvanized hinges are now predictably rotted at the footing, and an honest quote is a full post-and-hardware reset, not a hinge swap.
Gate Realignment
A Murphy swing gate that drags on the driveway or misses the latch by half an inch is usually a post that has moved, not a hinge that has worn out. We reset the post, re-shim the hinges, and adjust the latch throw so the gate closes level and stays closed. If the post has heaved more than two inches in a single season, we’ll recommend a deeper concrete footing recommendation instead of a cosmetic fix that fails next spring.
Weld & Rust Repair
Ornamental iron gates in Murphy’s 2003-2008 builds are now old enough that the factory welds are starting to spall and bubble. We grind out the rust, re-weld the joints, and prime and topcoat to match your subdivision’s finish spec. If your HOA requires a specific powder coat color, we get that spec and match it before the compliance review.
Electric Gate Repair
When a Murphy Gate Motor & Opener runs but the gate doesn’t move, the usual culprits are a stripped drive gear, a dead capacitor, or a limit switch that drifted. We test the components, replace only what failed, and leave you a written record of the part numbers and the new settings. We work on LiftMaster, FAAC, Elite, Mighty Mule, and the other brands already in service on Murphy gates.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Murphy
Murphy properties have a mix of gate automation equipment, and replacement decisions often come down to familiarity. We carry parts for Elite, Mighty Mule, and LiftMaster on our service trucks, so a typical swing gate operator failure doesn’t require a second trip. Whether your subdivision’s original installer put in a FAAC hydraulic operator or a linear-style residential arm, we diagnose and repair what’s already there before recommending any replacement.
Our Gate Repair team stocks common replacement hardware locally, and uncommon parts get ordered the same day we quote.
Common Gate Repair Problems We See in Murphy Homes
- Clay-soil post heave. The same expansive clay that cracks Murphy sidewalks also pushes gate posts out of plumb every spring and summer. Fixing this requires a deeper footing, not just a new hinge.
- HOA compliance after a repair. A gate that works but has the wrong hinge finish or a mismatched latch profile can get flagged. We match your subdivision’s covenant specs so the repair passes the first time.
- Rotted cedar post footings. Original 2000s-era cedar gates in older Murphy sections often look fine above ground but have rotted posts below grade. By the time the gate sags, the post is usually gone at the footing.
- Rust at ornamental iron welds. Factory welds from the 2003-2008 build wave are now bubbling through the powder coat on many Murphy driveway gates. This is repairable in place if addressed before the tubing wall-thickness is compromised.
Pricing for Gate Repair in Murphy, TX
Here is what Murphy homeowners can expect to pay, in writing, before work begins:
- Hinge replacement on a cedar privacy gate: $185-$320
- Weld and rust repair per section: $120-$280
- Full gate realignment with post reset: $400-$850
- New steel post with deeper concrete footing: $600-$1,100
- Swing gate operator repair (board/capacitor/limit switch): $250-$600
- Full ornamental iron gate reset with new footings: $900-$1,400
What moves the price: the gate’s weight, whether the post needs a new footing or just a re-shim, the automation brand, and what your HOA requires for finish matching. Every quote is written and handed to you before tools come out. Estimates are free. Call (469) 299-5902 for an exact number.
We Also Serve Cities Near Murphy
Our crews repair gates across the northeast Dallas metro, including Gate Repair in Murphy, Dallas, University Park, Oak Cliff, and Irving. If you’re in a neighboring city with a gate that has stopped operating, the same written-price and photo-documented process applies.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Murphy
Most Murphy HOAs require a compliance review after any exterior change, including gate repairs. The property manager or an architectural review committee compares the finished gate against the subdivision’s original design specs: finish type, color, hinge profile, and sometimes materials. If the repair doesn’t match, they issue a correction notice, and you pay to redo it. We keep a record of the common covenant sets for Murphy subdivisions we have worked in, and we match finish and hardware specs before the review happens. Call (469) 299-5902 if you want us to check your subdivision’s requirements before you file anything.
Because the hinges are not the problem. The post is moving. Murphy sits on expansive Blackland Prairie clay that swells and shrinks with seasonal moisture, and your gate post is shifting with it. Replacing hinges on a moving post just transfers the stress to the new hardware. The fix is to reset the post in a deeper concrete footing below the active clay zone, then re-hang the gate. We do this routinely in Murphy and document the footing depth and post position with photos before we close the hole.
Yes, if we repair in kind. Most Murphy HOAs that govern original cedar board-on-board gates require that any replacement boards match the original dimensions and that the gate’s finish matches the surrounding fence. If the gate needs full replacement, some HOAs also require the new gate to match the neighbor’s fence height and the subdivision’s standard. We can pull the specific covenant language from your HOA, match the material, and leave you a photo and written record of what was installed. Call (469) 299-5902 for a free quote.
In most cases, yes. We grind out the rusted welds, re-weld the joints, and prime and topcoat to match your HOA’s finish spec. If the rust has thinned the tubing wall below structural thickness, a section replacement may be required, but we quote exactly what we find before work starts. Your bill is written before the grinder comes out. Call (469) 299-5902 and we’ll inspect it.
Most Murphy HOAs require an architectural request or modification form before any visible change to the gate, including a new operator arm and bracket. The operator itself is often considered part of the gate’s operation, but if the arm’s color or the bracket style changes the gate’s appearance, the HOA can require a review. We can advise you on what your subdivision’s specific covenant requires and match the new operator’s visible hardware to the existing finish before you file. Our Murphy customers often avoid a compliance rejection this way.
Need a written price for your gate repair in Murphy? Call (469) 299-5902. A live person answers, the estimate is free, and the price is on paper before any work starts.
Written by Adrian Vance, Owner at Vance Gate Repair Dallas, serving Murphy since 2014.