Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Irving, TX
Gate access control in Irving means working on systems that are often thirty years old, tied to HOA infrastructure in Las Colinas, and stressed by North Texas black clay soil that shifts posts out of alignment. Our most common Irving call is a gate operator that won’t respond to a keypad or remote because the electronics are fine but the post has moved. If your gate won’t open, won’t close, or won’t recognize a code, call (469) 299-5902 and we’ll diagnose it with a written price before any work starts.
Why Irving Homes Are Different
Irving’s housing stock spans two distinct eras, and both create their own gate problems. Valley Ranch and the older neighborhoods west of MacArthur hold post-war homes built on expansive clay soil that shrinks in summer drought and heaves after rain, tilting gate posts and snapping welds. Las Colinas, built heavily from the mid-1980s onward, holds hundreds of HOA-governed communities with ornamental iron gates on brick pilasters, most running original swing-gate operators now three decades into service. Those operators face a specific Irving failure pattern: a leaning brick pilaster forces the operator arm to bind at end of travel, tripping the overload. The electronics look dead but the real problem is soil movement underneath the post. A technician who reaches for a new control board before checking the pilaster plumb is guessing. We don’t guess.
Our Main Irving Services
Irving homeowners call us most often for two things: repairing an existing gate that has stopped working, and installing a new gate or operator system built for local soil conditions. Here’s what each looks like in Irving.
Gate Repair in Irving
We repair swing and slide gates throughout Irving, from Valley Ranch tubular steel gates to the heavier ornamental iron in Las Colinas. Most repair calls involve hinge wear, operator travel issues, or welds that cracked when a post shifted in clay soil. We show up, name what we found, write the price, and leave you a photo record of what we adjusted or replaced. Gate Repair in Irving covers the full scope of what we fix, from broken hinges to gate frames out of square.
Gate Installation in Irving
Irving installations are specified around black clay soil and the HOA design standards common in Las Colinas, where pilasters are brick or stone and gate style is governed. We set posts below the active soil zone, weld frames to hold square, and document every setting before concrete cures. Gate Installation in Irving walks through what a new gate project involves, from post-setting depth to operator selection.
Gate Motor & Opener in Irving
We service nine automation brands, which matters in Irving because so many communities carry original operators from the 1990s, and parts availability varies by brand. Whether you have a FAAC, BFT, Linear, Viking, DoorKing, or LiftMaster, we diagnose the motor, limit switches, and control board, then write the repair or replacement price before ordering anything. Gate Motor & Opener in Irving covers motor replacement, limit-switch calibration, and opener upgrades.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Irving
Gate access control in Irving usually means one of two things: a residential keypad or intercom that won’t trigger the gate, or an HOA phone entry system in Las Colinas where the directory is out of date and residents can’t get in. Many of these systems are original installations from the 1990s, exposed to summer heat that degrades keypad membranes and electrical connectors. If a gate won’t respond to a code or the phone entry rings through to nothing, the failure is often simpler than it looks, and we document exactly what we find. This is the work described on our Gate Access Control service hub, from keypad replacement to full phone entry refits.
Keypad Entry
Signs you need it
The keypad works intermittently, some buttons don’t register, or the gate opens only from a remote.
What it costs in Irving
Keypad replacement in Irving typically runs $260-$490, and our written price covers the new keypad, the mounting hardware, and the programming file we hand you.
How we do it
We check voltage at the keypad, test each button against the programmed code, replace or reprogram the unit, and photograph the final wiring.
Phone Entry
Signs you need it
Visitors call the directory and hear ringing that never reaches a phone, or the system drops the call after one ring.
What it costs in Irving
Phone entry repairs in Irving generally run $400-$750, and our price includes reprogramming the directory and testing the relay that triggers the gate.
How we do it
We trace the phone line to the access board, test the relay that opens the gate, reprogram the directory, and leave a photograph of every changed setting.
What Gate Access Control Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Keypad replacement | $260-$490 |
| Phone entry repair | $400-$750 |
| Video intercom replacement | $800-$1,500 |
Can you program a keypad to work with an existing Irving gate motor?
Yes. We program keypads to every brand we service, including FAAC, BFT, Linear, and Viking, and we leave you a written record of the master code and user codes.
Do HOA communities in Irving need board approval for access control changes?
Las Colinas HOAs often require architectural review before visible equipment changes, and we document everything so your board packet is ready when you apply.
Gate Parts & Welding in Irving
Gate parts and welding in Irving split between two jobs: replacing parts that failed from age, and welding repairs that became necessary after black clay soil shifted a post or a vehicle clipped the gate. Hinge pins wear out, post brackets corrode, and welds crack along the bottom rail where the gate sags. We carry replacement parts and a welder on the truck, so most Irving part replacements and weld repairs happen in one visit. Our Gate Parts & Welding service hub details the full part inventory and welding scope.
Hinge Replacement
Signs you need it
The gate sags at the latch side, scrapes the ground, or the hinge pin shows visible wear or a broken weld at the post.
What it costs in Irving
Hinge replacement in Irving generally runs $180-$460 per hinge depending on whether the post bracket is welded or bolted.
How we do it
We unbolt or cut out the failed hinge, weld in or bolt the replacement, and check the gate for level before we photograph the work.
Post Replacement
Signs you need it
The gate drops suddenly, the post wobbles in the ground, or a gate creaks and binds as the post shifts out of plumb.
What it costs in Irving
Post replacement in Irving averages $700-$1,300, and that includes setting the new post below the active clay soil zone to prevent repeat movement.
How we do it
We remove the failed post, set a new one in concrete below the soil’s shrink-swell depth, weld the gate frame back to square, and photograph the post for your records.
What Gate Parts & Welding Costs in Irving
| Item | Typical range in Irving |
|---|---|
| Hinge replacement | $180-$460 per hinge |
| Post replacement | $700-$1,300 |
| Weld repair | $150-$450 |
Can you weld a broken Irving gate back on site?
Yes. We carry a mobile welding setup and can repair most cracked frames and broken weld points in Irving without removing the gate from the posts.
How long does a weld repair take on an Irving driveway gate?
Most weld repairs in Irving finish in two to three hours including cool-down, but post replacement jobs can run a full day because concrete must cure before the gate is rehung.
Brands We Service in Irving
We stock parts for FAAC, BFT, Linear, and Viking operators, and we service those brands plus LiftMaster, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most common boards and limit switches are on the truck, so Irving repairs don’t wait on a parts shipment. See our brands for the full list.
Pricing for Gate Repair in Irving, TX
| Service | Typical range in Irving |
|---|---|
| Keypad replacement | $260-$490 |
| Phone entry repair | $400-$750 |
| Video intercom replacement | $800-$1,500 |
| Hinge replacement | $180-$460 per hinge |
| Post replacement | $700-$1,300 |
| Weld repair | $150-$450 |
| Gate motor replacement | $575-$1,100 |
| Control board replacement | $340-$820 |
The two factors that push Irving gate repair prices higher are post movement from the black clay soil and the heavier ornamental iron common in Las Colinas, where a large gate needs more labor to rehang or realign safely. Our written price is handed to you before any work starts, and that’s the price you pay unless the scope changes and you approve it in writing.
Neighborhoods We Serve in Irving
We work across Irving, including the HOA-heavy gate systems in Las Colinas and Valley Ranch, where gate access and gate repair often intersect with community board requirements.
- Las Colinas
- Valley Ranch
- Heritage District
- University Hills
- Cottonwood Valley
Service Area - Cities Near Irving
While this page covers Irving, we also answer calls from nearby communities. See our work in Dallas, TX, Grand Prairie, TX, Carrollton, TX, and Coppell, TX if your property sits close to the Irving line.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Irving
We dispatch local crews to Irving throughout the day and can usually have a technician on site the same day for an emergency gate failure. Call (469) 299-5902 and a live person answers.
Most repairs go through without board approval, but visible changes to a gate in Las Colinas or Valley Ranch may need architectural review. We provide photo documentation to support your application if needed.
Yes. We work on single-family driveway gates and multi-home community gates in Irving, including access control and operator work for HOAs across Las Colinas.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Irving Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.