Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Carrollton, TX
Gate access control and gate parts work in Carrollton follow a pattern we see every week: operators and entry systems installed during the city’s 1990s and 2000s western expansion have aged out all at once. The black clay soil does not help, moving posts and frames through a shrink-swell cycle that throws photo-eyes out of alignment and seizes hinges. If your automated gate no longer reads a keypad, a remote, or a phone app, call (469) 299-5902 and we’ll name the failure and the price before any work begins.
Why Carrollton Homes Are Different
Carrollton splits into two housing eras, and each produces a different gate failure profile. The ranch-style homes built in the 1950s through 1970s across central and east Carrollton mostly have manual wood or chain-link driveway gates with basic barrel hinges and gravity latches. Those fail slowly and visibly. The west side tells a different story. Master-planned HOA communities along Hebron Parkway and the President George Bush Turnpike corridor arrived in the 1990s and 2000s with ornamental iron automated gates, coded community entry systems, and operators from Elite, LiftMaster, and Mighty Mule installed during construction. Those systems are now 20 to 30 years old. Control boards corrode, loop detectors drift, swing arms bind, and posts heave as the expansive clay contracts in August and swells after spring rain. A gate that worked in March can bind hard by July without anyone touching it.
What this means practically is that Carrollton repair calls divide into two kinds: basic mechanical hinge and latch replacements on older manual gates, and full diagnostic work on aging automated systems in HOA neighborhoods where a gate that will not close is a compliance issue as well as a security problem. Winter ice storms add another layer, glazing sensors and frying boards in predictable post-storm waves that hit the whole DFW area. Carrollton gets the worst of it on exposed west-facing gates with no wind break.
Our Main Carrollton Services
These are the two pages Carrollton homeowners ask for most often when a gate stops behaving.
Gate Repair in Carrollton
The broad repair page covers what is actually broken: swing arms, hinges, posts, tracks, rollers, pickets, and frames. In Carrollton, soil movement and storm damage are the two most common root causes, and we photograph both before we touch anything. Read Gate Repair in Carrollton for the full scope, including same-day response for a gate stuck open or jammed across a driveway.
Gate Installation in Carrollton
New gates in Carrollton have to fit the housing stock. A west-side HOA requires ornamental iron that matches the streetscape; a central Carrollton ranch home often does better with a simpler steel frame gate on new posts. We measure, quote in writing, and schedule installation around your HOA’s approval timeline. See Gate Installation in Carrollton for details.
Gate Motor & Opener in Carrollton
When the motor runs but the gate does not move, or the opener hums and trips, the fault is usually in the operator rather than the gate itself. Carrollton’s aging cohort of Elite, LiftMaster, and Mighty Mule operators means we carry common boards, arms, and limit switches on the truck. The page is Gate Motor & Opener in Carrollton.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Carrollton
Gate access control in Carrollton means the electronics that decide who gets through: keypads, remotes, phone entry, card readers, and intercoms mounted on gates that were largely installed in the 1990s and 2000s. Twenty to thirty years later, those boards and sensors are failing on a predictable schedule, and the black clay soil underneath them keeps shifting posts enough to throw alignment off by enough to matter. A gate that will not open for a resident but opens fine for a guest code is an access control problem, and it is almost always diagnosable in one visit. That is the work we do under Gate Access Control, with a written fault description and a fixed price before we replace a single board.
Keypad Entry
Signs you need it
The keypad accepts a code but the gate does not move, or it works in warm weather and fails after rain.
What it costs in Carrollton
Keypad replacement in Carrollton typically falls between $180 and $420, with the higher end for wired units integrated into a larger Entry system.
How we do it
We test voltage at the keypad, isolate whether the fault is the keypad, the wiring, or the control board, and replace only the failed component.
Phone Entry
Signs you need it
The gate’s phone-entry module will not dial out, or the call connects but the button on the resident’s phone will not open the gate.
What it costs in Carrollton
Phone-entry repairs in Carrollton run between $220 and $450, depending on whether the unit needs a new cellular module, antenna, or full board replacement.
How we do it
We check signal strength at the unit, confirm the phone line or cellular path is active, then repair or replace the dialer and re-register resident numbers.
Video Intercom
Signs you need it
The video feed is black, the audio is one-way, or the indoor monitor no longer pairs with the gate station.
What it costs in Carrollton
Video intercom work in Carrollton falls between $280 and $650 depending on whether we are replacing a handset, a camera module, or rewiring the run.
How we do it
We test continuity on each conductor, identify the failed component, and photograph the final wiring before closing the housing.
What Gate Access Control Costs in Carrollton
| Item | Typical range in Carrollton |
|---|---|
| Keypad replacement | $180 - $420 |
| Phone-entry module repair | $220 - $450 |
| Video intercom repair | $280 - $650 |
Can you fix my gate access system the same day in Carrollton?
Yes, in most cases. We carry common keypad, phone entry, and intercom components on the truck, and our live dispatch takes calls 24/7. A gate that will not open for a resident is a priority call. Call (469) 299-5902 and we will tell you whether a same-day visit is possible for your address.
Do you work on existing access systems, or only install new ones?
We repair and service the system already on the gate. Most Carrollton access failures are fixable, often by replacing one board or sensor. We do not steer toward replacement when a repair restores the function. You get the diagnosis and the price in writing first.
Gate Parts & Welding in Carrollton
Gate parts and welding in Carrollton come down to steel, hinges, posts, rollers, and the clay soil that works against all of them. The city’s 1950s and 1960s manual gates wear through barrel hinges and tear out of wood posts, while the 1990s and 2000s ornamental iron gates on the west side crack welds and bend pickets after post heave throws the frame out of square. We handle Gate Parts & Welding with welded repairs on site and replacements ordered to match the existing steel.
Hinge Replacement
Signs you need it
The gate drags on the ground at the latch side, or the hinge leaves show visible gap or wear at the pin.
What it costs in Carrollton
Hinge replacement in Carrollton runs between $100 and $300 per hinge, including grinding off the old weld and welding the new hinge in place.
How we do it
We unbolt or cut the failed hinge, weld a matched replacement, and photograph the penetration and alignment before the gate is lowered.
Post Replacement
Signs you need it
The post leans more than a few degrees, the gate binds mid-swing, or fresh caulk lines around the base open every season.
What it costs in Carrollton
Post replacement in Carrollton averages $600 to $1,500 per post, depending on removal difficulty, post size, and the concrete work involved.
How we do it
We remove the failed post, set the replacement in concrete at the correct depth for the clay soil, and re-hang the gate after the concrete has cured.
Gate Rollers
Signs you need it
The gate shudders when it opens, the roller wheel is flattened on one side, or the gate chews through new roller brackets every few months.
What it costs in Carrollton
Gate roller replacement in Carrollton runs between $50 and $250 per roller, with steel and sealed-bearing rollers at the upper end.
How we do it
We match the roller type to the track, replace the wheel and bracket, and adjust the height so the gate rolls without scraping.
What Gate Parts & Welding Costs in Carrollton
| Item | Typical range in Carrollton |
|---|---|
| Hinge replacement (per hinge) | $100 - $300 |
| Post replacement (per post) | $600 - $1,500 |
| Gate roller replacement (per roller) | $50 - $250 |
Can you weld a broken gate post or frame on site in Carrollton?
Yes. We carry a portable welder on the truck, and most broken welds on steel gates can be repaired without removing the gate. The repair is photographed and shown to you before we pack up. Call (469) 299-5902 for a written quote.
Do you supply replacement parts for gates you did not install?
Yes. We source hinges, rollers, wheels, and steel sections to match the existing gate, regardless of who built it. The replacement part number and the work are documented in writing before the job is finished.
Brands We Service in Carrollton
We work on DoorKing, Elite, Mighty Mule, and LiftMaster operators, among others, with common boards, arms, and remotes stocked on the truck for the brands most often found in Carrollton’s HOA communities. If a part is not on the vehicle, it is one distributor run away. See our brands for the full service list.
Pricing for Gate Repair in Carrollton, TX
| Service | Typical range in Carrollton |
|---|---|
| Gate installer and electrician service | $45 - $100 per hour |
| Gate repair service call in metro areas | $80 - $180 per visit |
| Keypad replacement | $180 - $420 |
| Phone-entry module repair | $220 - $450 |
| Video intercom repair | $280 - $650 |
| Hinge replacement (per hinge) | $100 - $300 |
| Post replacement (per post) | $600 - $1,500 |
| Gate roller replacement (per roller) | $50 - $250 |
Two things push Carrollton prices toward the upper end of these ranges: first, soil movement means a hinge or post replacement sometimes requires resetting the alignment of the entire frame, not just the broken part; second, HOA neighborhoods on the west side often require matching ornamental steel, which costs more than generic chain-link hardware. Every price is quoted in writing before we start, and the price you sign is the price on the invoice. That is Clause 1 of what we call the Haven Standard, and we have never handed a Carrollton customer a bill that was not already agreed to.
Neighborhoods We Serve in Carrollton
We cover all of Carrollton, from the older ranch streets east of I-35E to the HOA communities along Hebron Parkway and the Bush Turnpike, plus the commercial gates along the Valwood Parkway corridor. Typical response time across the city is under 90 minutes for an emergency call.
- Hebron Parkway corridor
- Castle Hills and west-side master-planned communities
- Central Carrollton ranch neighborhoods
- Southeast Carrollton near the Dallas border
- Valwood Parkway industrial district
Service Area - Cities Near Carrollton
We also run calls in the cities around Carrollton. Gates do not care about municipal boundaries, and neither do we. You will find us in Coppell, TX, Plano, TX, Grapevine, TX, and Dallas, TX on any given week.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Carrollton
For a gate stuck open or blocking the driveway, most Carrollton addresses are within 90 minutes of a dispatch. Live dispatching runs 24/7, so you will speak to a person when you call, not a voicemail queue. Call (469) 299-5902 and we will give you an honest arrival window.
Many do, especially west-side neighborhoods with covenants covering gate appearance and street-facing hardware. We are used to working from HOA approval letters and can provide the spec sheet and drawing your community needs. The approval process is usually the longest lead time in the job.
Parts, labor, and any disposal fees, itemized on one page before work starts. If we open the gate and find a second problem, we stop and get your signature on the new number first. What you sign is what you pay. That is the Haven Standard, and it applies to every Carrollton job.
When your gate stops working in Carrollton, call (469) 299-5902. We will answer, name the likely fault, and hand you a written price before any tool comes off the truck.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Carrollton Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.