Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Dallas
A new driveway gate in Dallas typically runs $2,400 to $7,800 installed, depending on whether you need a swing or slide configuration, the gate material, and how deep we have to set the footings. Most installations take one to two days on site once materials arrive. We serve every Dallas neighborhood, from Preston Hollow down to Lakewood and out past Far North Dallas, with crews who know what Blackland clay does to a gate post.
Before you commit to anything, you get a written price. That’s not a sales line, it’s how Vance Gate Repair has operated since 2014. You’ll know the exact number, the exact scope, and what the footing plan looks like before anyone digs a hole. Call (469) 299-5902 and a live person answers, any hour.
Why Vance Gate Repair Dallas Is Dallas’s Preferred Gate Installation Company
Dallas homeowners call us because we price the job in writing before work starts and we document what we installed, down to the part numbers and the final limit-switch settings. That habit comes from Adrian Vance’s commercial access-control background, where every site visit produces a record someone else can read later. It now applies to every residential driveway gate we touch in Dallas.
We’ve installed and repaired more than 22,000 gates since 2014, and every single one left with a written price agreed before the work and a photographed record when the crew pulled out of the driveway. Dallas customers in areas like Highland Park, Bluffview, and East Dallas regularly cite the written quote and the photo log as the reason they chose us over the other bid. You know what you’re paying, and you can see what was done.
Response time to Dallas is coordinated from our Dallas-Fort Worth office, with crews dispatched locally throughout the metro. We don’t route calls through a call center. A live person answers 24/7, and the technician who shows up is background-checked, uniformed, and named before arrival.
The 365-Day Done Right Promise covers every installation we complete in Dallas. If the gate isn’t right within a full year, we make it right at no additional charge. That’s Clause-by-clause how The Haven Standard works: written price first, photographic evidence on every visit, and a year of accountability after the job.
Our Gate Installation Services in Dallas
Driveway Gate Installation
A driveway gate in Dallas has to survive two things: the Blackland clay under the posts and the August heat on the operator. We handle both. Footings go below the active clay line, not just below the frost line like a northern install. Most driveway gate projects in Dallas run between $2,800 and $6,500, with slide gates trending higher due to the additional rail and operator work.
Whether you’re adding a single swing gate to a Preston Hollow driveway or a full double gate on a wider entrance in Lake Highlands, we spec the operator for Dallas summers. That means ventilation or solar shielding where the install location calls for it.
Pedestrian Gate Installation
Pedestrian gates in Dallas are often paired with a driveway gate or installed as a separate side-yard access point. In older East Dallas neighborhoods with narrow side lots, a pedestrian gate has to swing without clipping the house or crossing the property line, which means setting the post plumb and choosing the right hinge offset.
We fabricate and install steel pedestrian gates that match the existing driveway gate details or stand alone as their own entry. Most pedestrian gate installs in Dallas run $900 to $2,400 including posts, hinges, and a quality latch or lock.
Sliding Gate Installation
Slide gates are the right answer for a lot of Dallas properties, especially on shared driveways and tight frontages where a swing gate would cross a right-of-way or the neighbor’s fence line. We install cantilever and V-track slide gates, and we size the operator for the actual gate weight, not the brochure number.
Slide gate installation in Dallas typically runs $3,400 to $7,800. The range accounts for gate width, material, and whether we’re running power to the operator or configuring a solar setup. On a Preston Road shared driveway in Preston Hollow, we installed a slide gate because a swing configuration would have crossed the property line. That’s the kind of site constraint we work around regularly.
Security Gate Installation
A security gate in Dallas has to do more than look substantial. It has to operate reliably in heat that pushes 105°F and keep working the morning after an ice storm. We build security gates with heavier gauge steel, commercial-grade hinges and posts, and operators spec’d with headroom for the conditions, not the minimum wattage that passes a bench test.
We also add safety photocells as standard on any automated security gate, because a gate is a moving hazard as much as it is a barrier. The photo-eye is the infrared beam that stops the gate if a person, car, or animal crosses the travel path. On a residential install in Dallas, omitting it is not a corner we’re willing to cut.
For a full breakdown of what an automated system involves, see our Gate Installation page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Dallas
We install and service operators from LiftMaster, FAAC, Elite, and Mighty Mule, among others, so you’re not steered into replacing a motor we can actually work on. In Dallas, LiftMaster operators are common on residential swing gates, while FAAC slide operators show up frequently on shared-driveway installs where rack-and-pinion drive is the cleaner solution. We keep common parts for these brands stocked locally, which shortens the wait when a control board or limit switch needs replacing mid-install.
Common Gate Installation Problems We See in Dallas Homes
- Post lean from clay shrink-swell. Blackland clay expands when wet and contracts hard in a dry spell. A footing poured too shallow lets the post move a half-inch out of square within two seasons, and the gate stops latching.
- Shared driveway installs spec’d as swing gates. When a swing gate would cross a property line or right-of-way, it has to be a slide gate. We see swing gates on shared driveways that should have been slide gates all along.
- Operators overheating in Far North Dallas HOA entries. A gate operator mounted in direct sun with no ventilation will thermal-trip on a 105°F afternoon. We shield and vent these installs from the start.
- Control board failures after ice storms. The February 2021 freeze killed plenty of gate operators that were never spec’d for sustained cold. Our installs account for the occasional Texas hard freeze, not just the standard summer load.
Pricing for Gate Installation in Dallas, TX
Here’s what you can expect to pay for gate installation in Dallas:
- Pedestrian gate: $900-$2,400 installed
- Single swing driveway gate: $2,800-$5,200 installed
- Double swing driveway gate: $4,500-$7,800 installed
- Slide gate (single or shared driveway): $3,400-$7,800 installed
- Security gate with automation and photo-eye: $4,200-$8,500+ installed
Cost moves with gate width, material, operator type, and how much trenching the power run requires. Solar setups add equipment cost but save the trench. Every price we quote is written and handed to you before any work begins, under Haven Standard Clause 1. You’ll never get a verbal “around $5,000” and then an invoice for $7,200. The number you approve is the number you pay. Estimates are free, and we’ll also review any written estimate from another gate company at no charge.
We Also Serve Cities Near Dallas
Our Dallas crews also cover Irving, Grand Prairie, Carrollton, and Coppell. If your gate is in one of those cities, the same written pricing and documentation standard applies. You can read more about the full scope of what we do on our Gate Installation in Dallas coverage page.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Dallas
Because the footing wasn’t deep enough for Blackland Prairie clay. Dallas sits on expansive clay that shrinks several inches during a dry summer, and a shallow footing moves with it. We set posts below the active clay line, typically 4 feet or more, and backfill with select material so the post stays put through the shrink-swell cycle. Call (469) 299-5902 and we’ll assess the footing depth on your existing install.
It depends on the right-of-way and the property line, but in practice, yes, most shared driveways in Dallas need a slide gate because a swing panel would cross onto the neighbor’s side or into the easement. We evaluate the site and the recorded right-of-way before recommending a configuration. If a slide gate is required, the price is written before work starts, and the install includes a safety photocell where the travel path is tight.
Yes. Preston Hollow has mature tree cover on many lots, so solar viability depends on panel exposure. We assess the site and either size the panel and battery bank correctly or recommend a hardwired power run if the shade will leave the operator underpowered. A solar setup on a driveway gate in Dallas typically adds $600 to $1,400 over a standard AC operator install.
Because many operators were installed without ventilation or solar shielding, and a 105°F afternoon pushes the internal temperature past the thermal trip point. The fix is ventilation, shielding, and sometimes a higher-duty operator. We spec entry gates in Far North Dallas for the actual heat load, and we document the temperature readings and the changes made in the photo log.
Yes. A photo-eye is the infrared beam that tells the gate to stop if something is in the travel path, and it’s not optional on an automated gate. On tight Dallas lots where the gate travels close to a fence, a wall, or a neighbor’s property line, the photo-eye is the difference between a gate that stops and a gate that hits. We install photocells as standard, and we photograph the alignment before we leave. Call (469) 299-5902 for a free estimate on a new gate or to have an existing one checked.
Get a Written Price Before You Decide
If you’re planning a gate installation in Dallas, start with a written estimate. We’ll come out, measure the site, check the soil and the right-of-way, and hand you a line-item price before you commit to anything. No verbal ballparks. No surprise invoice. Just a real number, a real scope, and a documented record when the work is done.
Call (469) 299-5902 now. A live person answers, day or night, and we’ll schedule your free estimate in Dallas.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Dallas and the surrounding metro since 2014.
Gate Installation in Nearby Areas
