Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Carrollton
Gate installation in Carrollton costs between $2,400 and $9,800 for most residential projects, with automated driveway gates in western HOA communities typically landing between $4,500 and $7,500. We install driveway, pedestrian, sliding, and swing gates across Carrollton, and we quote every job in writing before any work starts. If your existing gate failed after a storm or the clay soil finally won, call (469) 299-5902 and we’ll send a technician who can name the problem and the price on the same visit.
Carrollton presents a specific challenge: the expansive black clay under the city swells and contracts every wet-dry cycle, and gates that weren’t footed deep enough eventually rack, drag, or snap at the post. Most of our Carrollton installation work replaces gates that were never built for this soil in the first place. We plan for it.
Why Vance Gate Repair Dallas Is Carrollton’s Preferred Gate Installation Company
We’ve worked on gates in Castle Hills, Indian Creek, and the Hebron Parkway corridor long enough to know what the soil does to a post set 24 inches deep. Adrian Vance started this company in 2014 after years on commercial access-control sites, and that background shows in how we document every Carrollton job: written scope, written price, photographed record before we leave. No other gate installer we know of hands the homeowner a photo log of what was found, what was set, and what was installed.
The 365-Day Done Right Promise covers every installation we complete in Carrollton. If the gate isn’t right within a year, we fix it. No argument, no fee. That’s the Haven Standard, and it’s in writing on every job.
Our dispatchers coordinate from the DFW metro office, and crews run routes through Carrollton daily. A live person answers the phone at (469) 299-5902 at any hour, so when a storm takes out your operator at 11 p.m., you talk to a person, not a voicemail.
Our Gate Installation Services in Carrollton
Driveway Gate Installation
Driveway gate installation in Carrollton runs $3,800-$9,800 depending on gate width, material, and automation. Most of the driveway gates we install in western Carrollton’s HOA communities are ornamental iron or steel frame gates with automated operators, and we size the footings for the clay, not for the brochure. A double driveway gate in Castle Hills or along Rosemeade Parkway needs deeper footings and a heavier hinge post than the same gate would in sandy soil.
Pedestrian Gate Installation
A pedestrian gate installation in Carrollton typically runs $1,200-$3,200. These are the smaller walk-through gates beside a driveway or along a side yard, and they’re often the first thing we fix after a homeowner spends a season fighting a sagging gate that scrapes the walkway. We install pedestrian gates with steel posts set below the clay movement line and self-closing hinges where HOA rules require them.
Sliding Gate Installation
Sliding gate installation in Carrollton starts around $4,200 for residential cantilever gates and runs higher for the heavy commercial slides along the Valwood Parkway industrial corridor. A slide gate avoids the swing-arc problem on sloped driveways, which matters on several Carrollton lots where the driveway falls toward the street. We install V-track and cantilever slides, and we spec the operator for the gate’s actual weight, not the optimistic number on the old motor.
Swing Gate Installation
Swing gate installation in Carrollton runs $3,500-$8,000 for automated single gates and $6,000-$12,000 for double swing gates with operators on both leaves. Swing gates are the most common design in Carrollton subdivision entrances and residential driveways, and they fail most often because wind pushes the gate and the post has already been weakened by clay movement. We set posts deeper than code minimums on every swing gate we install here.
For full details on the range of work we do, see our Gate Installation service page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Carrollton
We service and install nine major automation brands, including FAAC, BFT, Linear, and Viking, so we don’t steer Carrollton homeowners toward a replacement motor just because we’d rather not work on what’s already there. If your Elite or LiftMaster operator from the 1990s is still sound, we’ll service it. If it’s dead and not worth rebuilding, we’ll quote a replacement with the brand that fits your gate and your HOA’s requirements. We keep common boards, remotes, and safety beam parts on our trucks serving Carrollton, which shortens the second visit considerably.
Common Gate Installation Problems We See in Carrollton Homes
- Post heaving from expansive clay. Carrollton’s black gumbo clay swells after spring rain and shrinks in August. Footings set at 24 inches move with the soil, and the gate post tilts, dragging the gate on the driveway until the operator burns out.
- Wind damage to solid infill gates. A solid metal or composite gate face acts like a sail in a spring line squall. The hinge post cracks at the footing, and the gate frame racks out of square. We see this most often on the larger lots along Hebron Parkway where there’s no structure to break the wind.
- Dead operators after ice storms. Freezing rain coats the operator, photocells, and hinges. Control boards fry when the thaw comes, and homeowners who force the gate open with the operator engaged damage the rack or bend the track. The manual release exists for this exact situation.
- HOA compliance issues on 20-30-year-old gates. Western Carrollton’s master-planned communities have aging automated gates that no longer meet current safety requirements for photocell placement and reverse sensitivity. We bring these gates up to standard during replacement, which keeps the HOA’s management company from flagging the property later.
The aging gate cohort concentrated in Carrollton’s west side along the Hebron Parkway and President George Bush Turnpike corridors was largely installed between 1995 and 2010 with Elite, LiftMaster, and Mighty Mule operators. Those units are now past their expected service life, and the clay soil beneath them has had 20-30 years to work on the posts. When we replace one of these gates, we’re usually correcting an installation that was never right for the ground it sits on.
A Carrollton Job We Won’t Forget
We replaced a wind-racked double swing gate in the Castle Hills neighborhood near Hebron Parkway after a March storm bent the hinge posts and tore the gate frame out of square. Our crew dug new footings below the clay swell line, installed a LiftMaster LA400 dual operator with new safety photocells, and realigned the gate so it opens and closes squarely even after the soil expands and contracts. That gate has now been through two full wet-dry cycles without a service call.
Pricing for Gate Installation in Carrollton, TX
Here’s what we quote in Carrollton, and these are the ranges you’ll see on the written estimate before any work begins:
- Manual pedestrian gate: $1,200-$3,200
- Single swing driveway gate with automation: $3,500-$6,500
- Double swing driveway gate with dual operators: $6,000-$12,000
- Residential sliding gate with operator: $4,200-$8,500
- Commercial slide gate (Valwood corridor class): $9,000-$25,000+
- Operator-only replacement on an existing gate: $900-$2,400
- Post replacement and gate re-hang: $1,400-$3,800
What moves the number: gate width and weight, whether we’re automating an existing manual gate or starting fresh, the operator brand your HOA requires, and whether the old posts can be reused. The written price is what you pay. If we find something unexpected after digging, we stop and show you before spending another dollar. Call (469) 299-5902 for a free estimate, and we’ll hand you numbers you can keep.
We Also Serve Cities Near Carrollton
Beyond Carrollton, our crews cover Coppell, Plano, Grapevine, and Dallas. If you’re in one of those cities and dealing with the same North Texas clay and storm damage, call (469) 299-5902 and we’ll route the nearest technician.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Carrollton
Gate post footings in Carrollton should be set 36 to 42 inches deep, below the active swell line of the local expansive clay. The black gumbo soil here moves enough in a single wet-dry cycle to tilt a 24-inch footing within two to three years, and we see the result on nearly every older gate we pull. Deeper footings with gravel backfill and a wider base are the only reliable fix we’ve found for Carrollton’s soil, and that’s how we install every post. Call (469) 299-5902 for an exact quote on your gate.
A solid infill driveway gate in Carrollton should be engineered for at least a 90 mph wind gust rating, which most big-box gate kits do not meet. Spring squall lines coming off the plains hit gates on open lots along Hebron Parkway and the Bush Turnpike corridor with full force, and an unrated solid gate face simply folds or snaps the post. We spec wind-rated frames and heavy post sections on any solid infill gate we install in Carrollton.
Every automated gate has a manual release mechanism, usually a pull handle or key on the operator that disengages the gear drive so the gate can be pushed by hand. Pull the release, unlock any mechanical lock, and push the gate slowly through its full travel. Never force an automated gate that’s still engaged; you’ll strip the rack or bend the slide track, and that’s a repair bill on top of the power outage. If you can’t locate the release or the gate won’t move after it’s disengaged, call us at (469) 299-5902 and we’ll walk you through it.
Yes, solar gate openers work on double swing gates in Carrollton HOAs, and we install them regularly where running conduit from the house to the gate would mean trenching under a driveway or through a landscaped bed. The panel needs direct southern exposure, and the battery bank has to be sized for the gate’s duty cycle; a double gate that cycles 20 times a day needs a larger panel and battery set than a single gate used six times a day. We’ll spec the system and submit whatever drawings the HOA’s architectural committee requires.
A gate that sags after rain is almost always a post or footing problem, not a hinge problem. The clay swells, the post moves, and the gate leaf drops at the latch end. Tightening hinges only masks the issue for a few weeks. The permanent fix is to pull the post, dig below the swell line, re-set it in concrete with proper backfill, and re-hang the gate square. We do this often enough in Carrollton that the crew can usually complete the job in a single day. Call (469) 299-5902 for a free estimate and we’ll confirm the cause before quoting the repair.
Get a Written Quote for Gate Installation in Carrollton
If your gate is sagging, failing after the last storm, or simply no longer matches the house, call us at (469) 299-5902. We’ll schedule a technician for a free estimate, hand you a written price before any work starts, and leave you with a documented record of everything we did. That’s the Haven Standard, and it’s how we’ve installed and repaired gates in Carrollton since Adrian Vance opened the company in 2014.
Written by Adrian Vance, Owner at Vance Gate Repair Dallas.
Gate Installation in Nearby Areas