Gate Installation in Irving - Free Survey, One Written Price

Fast, Reliable Gate Installation Across Irving

A new driveway gate in Irving typically runs $4,200 to $11,800 installed, depending on whether it’s a single swing gate, a sliding gate, or a custom ornamental double gate. Most installations take one to three days on-site, with the concrete footing pour scheduled a day or two before the gate is hung. If you’re in Irving and need a gate built, hung, automated, and documented, call us at (469) 299-5902 and we’ll give you a written price before any work starts.

We work in Irving every week, and we know the difference between installing a gate in a 1960s post-war subdivision near Story Road and hanging a heavy wrought-iron swing gate on a brick pilaster in a Las Colinas HOA community off MacArthur Boulevard. The soil, the setback, the HOA’s architectural review requirements, and the age of the existing posts all change how the job has to be done. A gate company that treats every Irving address the same will install a gate that binds in two years. We build for the clay.

Why Vance Gate Repair Dallas Is Irving’s Preferred Gate Installation Company

Vance Gate Repair Dallas has been installing and repairing gates since 2014, when Adrian Vance moved from commercial access-control work into residential driveway and pedestrian gate systems. That background still shapes how we work in Irving: we document everything, we price in writing before the first tool comes off the truck, and we treat a residential gate with the same discipline as a corporate access point.

Irving homeowners and HOA boards call us because we hand over a written scope and a flat price on every installation, not a verbal estimate that drifts. Under The Haven Standard, every job we complete in Irving includes a photo record of what was found, what was installed, and what the finished gate looks like in operation. You get the wiring diagram, the operator settings, the limit-switch readings, and the serial numbers of every part we touched. When a future technician arrives, they won’t have to guess what was done. That’s the documentation habit Adrian built on commercial access-control sites starting in 2014, and we bring it to every Irving driveway.

Response time to Irving neighborhoods is same-day for emergency repair calls, and installation estimates are typically scheduled within 48 hours of your call. A live person answers the phone 24 hours a day, seven days a week. You won’t leave a voicemail and wait for a callback.

Our Gate Installation Services in Irving

Driveway Gate Installation

Driveway gates in Irving fall into two broad groups. The older neighborhoods around the city’s center, many built between the 1950s and the 1970s, tend to have wider lots and simpler gate needs: a single swing gate, a chain-link or tubular steel panel, a basic operator. The HOA communities of Las Colinas, built from the mid-1980s onward, are a different animal. Those driveway gates are ornamental wrought iron or tubular steel on brick or stone pilasters, and they’re tied to telephone entry systems, loop detectors, and often a pedestrian gate beside the vehicle gate. We install both, and we never assume the simpler job until we’ve seen the property.

Pedestrian Gate Installation

A pedestrian gate beside the driveway gate is standard in Las Colinas communities, and it’s usually the part that gets the most daily use. We install standalone pedestrian gates with their own operators where needed, and we match the style of the pedestrian gate to the driveway gate so the entry reads as one piece of design rather than two separate decisions. In Irving, pedestrian gates need the same attention to post depth and soil movement as the vehicle gate. The clay doesn’t care which gate it’s under.

Sliding Gate Installation

Sliding gates are common in Irving on properties where the driveway runs parallel to the street or where a swing gate would block a sidewalk or a corner. They’re also the right answer when a driveway slopes upward from the street and a swing gate would drag or bind. A sliding gate in Irving needs a level track bed, a properly poured foundation for the motor and the gate track, and a loop detector that’s calibrated to the clay. We’ve pulled plenty of original 1990s sliding gate operators out of Las Colinas communities where the track had shifted with the soil and the gate had been grinding against its own hardware for years.

Swing Gate Installation

Swing gates are the dominant style in Irving’s upscale HOA communities, and they’re the installation we’re most often asked to match to an existing entryway. A heavy custom wrought-iron swing gate on a brick pilaster is a structural project, not just a gate project. The post has to be set deep enough in stable soil, the operator has to be sized for the actual weight of the gate, and the hinge geometry has to be right or the gate will sag, bind, and eventually tear the operator off its mount. We fit the operator to the gate, not the other way around.

Security Gate Installation

For Irving homeowners and HOA boards who want more than a visual barrier, we install security gates with matched intercom systems, camera entry, remote monitoring, and operators rated for heavy continuous use. In Las Colinas, security gates often mean full-custom steel frames with ornamental overlays, telephone entry panels tied to the HOA’s existing directory system, and underground operators where an above-ground arm would be unsightly or vulnerable. We design these installations for the soil first and the electronics second. A security gate that shifts out of alignment is not a security gate.

Before

After

Trusted Brands We Service in Irving

Vance Gate Repair Dallas installs and services nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t steer Irving customers toward a single brand or push replacement when a repair makes more sense. If you have an existing FAAC operator from a 1990s Las Colinas installation that’s still sound but needs a new control board, we’ll source the board. If you’re building new and want an Elite or LiftMaster operator sized to a heavy custom gate, we’ll spec it and quote it in writing. Our dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, and our crews serve Irving locally, which means parts access is fast and we’re not waiting on a shipment from out of state when your gate is down.

Common Gate Installation Problems We See in Irving Homes

• Leaning brick pilasters from clay soil movement. North Texas black clay shrinks in summer drought and heaves when wet. In Irving, that movement tilts gate posts and brick pilasters out of plumb, binding the operator arm at the end of travel and tripping the overload. The board replaces the operator, the gate binds again, and the cycle repeats until someone relevels the post footing.
• 30-plus-year-old operators hitting end of life in Las Colinas. The original swing and slide gate operators installed when Las Colinas was built out through the 1980s and 1990s are now reaching end-of-life simultaneously. Gearboxes baked dry by 100°F-plus summers, worn limit switches, and brittle wiring are all showing up now. No neighboring city has this same critical mass of same-era automated gates failing at once.
• Loop detectors losing calibration in shifting soil. Buried loop detectors in Irving’s clay shift as the soil moves, which causes gates to open and close erratically or fail to detect a vehicle sitting at the exit. HOA communities often replace the detector when the real problem is the trench the wire sits in.
• Undersized operators on heavy ornamental gates. A custom wrought-iron double swing gate can weigh 800 pounds or more per leaf. When the original installer put a residential-grade operator sized for half that weight on it, the motor strains, the gearbox burns out, and the homeowner in Irving is left paying for a replacement they shouldn’t have needed yet.

Pricing for Gate Installation in Irving, TX

We Also Serve Cities Near Irving

Our crews cover the metro side of DFW around Irving, and we regularly install gates in Dallas, Grand Prairie, Carrollton, and Coppell. If you’re just outside the Irving city line and wondering whether we’ll come to you, call (469) 299-5902 and ask. You can also read about our full Gate Installation capabilities or see what applies specifically to Irving across our other local pages.

FAQs - Gate Installation in Irving

Why does the gate in my Las Colinas HOA keep tripping the overload after a new operator was installed?

The operator was likely replaced without addressing the real cause: a post or pilaster that’s shifted out of plumb from clay soil movement. When the post tilts, the operator arm binds at the end of travel, draws more current than it’s rated for, and trips the overload. Replacing the operator again won’t fix it. The post has to be releveled and the footing re-set, then the new operator needs to be calibrated to the corrected geometry. Call (469) 299-5902 and we’ll photograph the current position and show you exactly what’s out of plumb before we quote anything.

Can you match a new ornamental gate to the existing brick and wrought-iron style common in Las Colinas communities?

Yes. Most Las Colinas HOA entryways use ornamental wrought-iron or tubular steel panels on brick or stone pilasters, and we match new gates to that existing style in material, finish, and proportion. HOA architectural review committees in Irving often require a rendering and a written description before approval, and we provide both as part of the estimate package. Your new gate should look like it belongs to the neighborhood, not like a catalog insert.

Is it cheaper to repair the sagging gate panel or replace the hinge post first?

Replace the hinge post first. A sagging gate in Irving is almost always the result of the hinge post moving out of plumb, usually from clay heave. If you repair the sagging panel or add a brace without fixing the post, the gate will keep pulling the hinge side down and the problem returns within a season or two. Fix the post, then straighten and reinforce the panel. It costs less in total than doing it twice. Call (469) 299-5902 for a written quote that includes the post work and the panel work as one scope.

What brand of gate operator do you recommend for a heavy custom wrought-iron driveway gate in Irving?

For a heavy custom wrought-iron gate in Irving, we usually spec LiftMaster or Elite operators, both of which handle continuous-duty cycles and heavy leaf weights without burning out. The more important variable is sizing the operator correctly to the actual gate weight and travel arc, which we measure on-site. A properly sized operator on a properly set post will run for years. We’ll quote the brand and model in writing before any work starts, along with the part number and the service manual.

Do you install underground operators for gated entries where above-ground arms would be unsightly?

Yes. Underground operators are common in Las Colinas communities where the gate is ornamental and an above-ground arm would clutter the entry. We install them on new gates and retrofit them on existing gates where the geometry allows. Underground operators in Irving require a well-drained pit and stable soil, and we set the pit with proper drainage so water doesn’t sit inside the mechanism. Call (469) 299-5902 to schedule a site visit and we’ll tell you whether your entry can support one.

Call Vance Gate Repair Dallas for Gate Installation in Irving

The Las Colinas insight matters here: Irving has a concentration of aging automated gates that no neighboring city shares, and most of the failures we see start in the clay, not in the motor. If your gate is binding, sagging, or tripping the overload, get the soil checked and the post releveled before you buy another operator. If you’re building new, build for the clay.

We install driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates across Irving, and every job ships with a written price before work begins and a full photo record when it’s done. That’s the Haven Standard, and it applies to every gate we touch. Call Vance Gate Repair Dallas at (469) 299-5902 for a free estimate. A live person answers, day or night.

Written by Adrian Vance, Owner at Vance Gate Repair Dallas, serving Irving with documented gate installation since 2014.